Search found 13 matches
- Sun Sep 26, 2010 8:05 am
- Forum: Builders' Forum
- Topic: Hiawaths Table of Offsets
- Replies: 10
- Views: 4662
- Tue Aug 03, 2010 10:06 am
- Forum: Project Directories
- Topic: 16' 0" Prospector
- Replies: 92
- Views: 366663
Prospector
Prospector Completed Wood: western red cedar hull, cherry, bass, & maple accents, ash gunwales Epoxy: MAS System with slow hardener (worked very well!) Stem Bands: polished aluminum Weight: 52 lbs Time: Begun in July 2009; work suspended over the winter; completed in July 2010 First Launch: July...
- Sat Jul 24, 2010 1:54 pm
- Forum: Builders' Forum
- Topic: prospector
- Replies: 6
- Views: 2822
Great video!!! I just put on the first coat of varnish on the hull of our Prospector this morning. We hope for the first launch next weekend. Your video reminded me of many of the steps that we went through to build ours. One thing your video is missing is the many hours of sanding! Your canoe looks...
- Thu Jul 15, 2010 7:22 am
- Forum: Builders' Forum
- Topic: interior glassing
- Replies: 3
- Views: 2030
My son and I just glassed the interior of our Prospector last weekend. We laid the glass over the hull of the canoe and used a scissor to cut it about 2 inches below the shear. At the ends we cut it to roughly end at the inside stem. We continued this cut down the centre until the end of the stem. W...
- Tue Jul 06, 2010 7:34 pm
- Forum: Builders' Forum
- Topic: fiberglass installation
- Replies: 4
- Views: 2673
Another valuable resource online is http://tinyurl.com/4vpdza . I found the section Fibreglassing 101 to be very helpful.
Mervin Friesen
Prospector 16'
Mervin Friesen
Prospector 16'
- Tue Jul 06, 2010 7:29 pm
- Forum: Builders' Forum
- Topic: Drilling Seat Frames for Cane
- Replies: 10
- Views: 5053
- Thu Jun 03, 2010 10:15 pm
- Forum: Builders' Forum
- Topic: Looks Like I Screwed Up the Stations
- Replies: 3
- Views: 3773
I don't know if you've figured out the problem. But you can use the tip I offered at this link to increase the height of the forms. http://www.bearmountainboats.com/phpbb2/viewtopic.php?t=3515 I drew up my stations from an earlier edition of Canoecraft. In it it states that the strongback line is 2 ...
- Sat Nov 14, 2009 10:05 pm
- Forum: Builders' Forum
- Topic: Prospector Outer Stem Shape
- Replies: 7
- Views: 7066
Thanks for your replies. Thanks also for the photos. Patrick's Dad - Yes, I did taper the stem, mortised the cedar down to the inner stem, and epoxied it together. Big Woodie - thanks for the photos, which help to visualize what I must do. I will plane them down and fair them to the shape of the can...
- Fri Nov 13, 2009 11:06 am
- Forum: Builders' Forum
- Topic: Prospector Outer Stem Shape
- Replies: 7
- Views: 7066
- Thu Nov 12, 2009 6:52 pm
- Forum: Builders' Forum
- Topic: Prospector Outer Stem Shape
- Replies: 7
- Views: 7066
Prospector Outer Stem Shape
I've researched Canoecraft and many web sites to find this information. It's hard to find a photo or a definitive answer. I'm not sure how to shape the outer stem at the bottom to flow with the rest of the canoe. Also. I'm concerned that it will be difficult to get the fiberglass to bond in the conc...
- Mon Oct 12, 2009 7:44 am
- Forum: Boat-Building Tips & Techniques
- Topic: Centering Formers
- Replies: 1
- Views: 4341
Centering Formers
I glued small sticks to the centerlines of each former. I then used these to ensure that the formers were centered. A taught line next to the small sticks allowed me to check for accuracy and readjust as needed. The sticks were broken away when the planking neared the top (bottom). Mervin Friesen Ch...
- Mon Oct 12, 2009 7:36 am
- Forum: Boat-Building Tips & Techniques
- Topic: Inner Stem
- Replies: 0
- Views: 24612
Inner Stem
I decided to make my inner stem about 1" longer and run it past the former. I notched out the former to fit the stem. The advantage was that the stem was locked in place and ensured that the it stayed centered. Mervin Friesen Chestnut Prospector http://i980.photobucket.com/albums/ae290/Friesen5...
- Mon Oct 12, 2009 7:25 am
- Forum: Boat-Building Tips & Techniques
- Topic: 1/2 Sheet Ply for Formers
- Replies: 0
- Views: 24776
1/2 Sheet Ply for Formers
The book Canoecraft suggests cutting plywood in half to make formers. There are a number of posts on this forum which suggest that ply cut into half sheets leaves the formers too short. I decided to scrimp a bit and cut the ply in half. When I drew the formers onto the 1/2 sheets, I intentionally cu...