Search found 871 matches
- Mon Jul 10, 2023 9:21 pm
- Forum: Builders' Forum
- Topic: interior epoxy advice
- Replies: 1
- Views: 23637
Re: interior epoxy advice
Hi Ben, This is probably too late, but I never sand runs, get a good carbide scraper and just flatten then ... sanding out a run is tricky because the sander will wander into the surrounding area. A decent carbide scraper will save you a lot of time and trouble, something like this is great https://...
- Sat Apr 29, 2023 1:48 pm
- Forum: Builders' Forum
- Topic: New Solo Canoe - Freedom 15'3" and 16'2"
- Replies: 84
- Views: 1046136
Re: New Solo Canoe - Freedom 15'3" and 16'2"
The only issue with "calculating" the seat placement, is that it assumes the canoe is built complete uniformity. The advice I would give, get the glass on the inside done .... get the gunnels on, then worry about determining the COB. The easiest way I have found is to just cut a stick to l...
- Thu Mar 16, 2023 11:13 am
- Forum: Builders' Forum
- Topic: Fiberglassing the hull
- Replies: 3
- Views: 35794
Re: Fiberglassing the hull
Hi Andy, The Bear Mountain Building series is a good source of info, if you haven't found them, the link is here : https://www.bearmountainboats.com/pages/videos It is important to realize that all these videos and comments are for the environment they are working in and with the experience the film...
- Tue Mar 14, 2023 9:59 am
- Forum: Builders' Forum
- Topic: Lofting the Bobs special
- Replies: 4
- Views: 29159
Re: Lofting the Bobs special
Hi Frederik, I did a post on lofting canoes from the CanoeCraft tables, hopefully the answer is there, you can find the link here: http://buildersforum.bearmountainboats.com/viewtopic.php?p=31740&hilit=lofting+canoecraft#p31740 The stem sheer values was confusing, but there is a section with pic...
- Mon Mar 13, 2023 10:57 am
- Forum: Builders' Forum
- Topic: Fiberglassing the hull
- Replies: 3
- Views: 35794
Re: Fiberglassing the hull
Hi Andy, I haven't actually mixed and matched epoxies, but everything I have read suggests that is a valid strategy. Another point to consider with the inside hull, is only apply 1 fill coat and leave the interior hull dimpled, a bit of texture there is better for traction so you don't slip on a sli...
- Thu Mar 09, 2023 12:49 pm
- Forum: Choosing a Design
- Topic: Auto Cad Question
- Replies: 14
- Views: 102488
Re: Auto Cad Question
Thanks Kliff, now if I just had access to a CNC .....
Brian
Brian
- Wed Mar 08, 2023 10:49 am
- Forum: Builders' Forum
- Topic: Planking the bottom past the stems and I'm having alignment issues.
- Replies: 5
- Views: 40377
Re: Planking the bottom past the stems and I'm having alignment issues.
The shimming process for alignment, should be a "one and done" affair (although it may take several strips). So if your adjustment isn't "holding" then the issue is something else. The angles the strips come into the center-line look symmetrical and the cut looks OK. Strip width ...
- Mon Mar 06, 2023 10:42 am
- Forum: Builders' Forum
- Topic: Planking the bottom past the stems and I'm having alignment issues.
- Replies: 5
- Views: 40377
Re: Planking the bottom past the stems and I'm having alignment issues.
Marks for including a pic, but it really doesn't demonstrate the issue you are having. I have found that the main culprit when the planks go out of alignment is that the last 3"-4" of self processed planks are not true. That is, as they clear the last featherboard/hold down, they tend to m...
- Sat Mar 04, 2023 11:24 am
- Forum: Builders' Forum
- Topic: Shaping the Stems
- Replies: 7
- Views: 87484
Re: Shaping the Stems
Sorry for the delayed response, yes ... here is a link to them
https://www.canoetripping.net/threads/n ... ing.77273/
Very simple, but also very effective
Brian
https://www.canoetripping.net/threads/n ... ing.77273/
Very simple, but also very effective
Brian
- Thu Mar 02, 2023 7:36 pm
- Forum: Builders' Forum
- Topic: Shaping the Stems
- Replies: 7
- Views: 87484
Re: Shaping the Stems
I find it is too easy to over do the shaping with a plane or spoke shave ... so I just use a sanding stick. The stem shaping is covered here on my last build thread https://www.canoetripping.net/threads/light-weight-solo-tripper-build.105054/post-105619 I find this is the easiest way to get those su...
- Tue Feb 21, 2023 5:06 pm
- Forum: Builders' Forum
- Topic: Mold Fair? & Upper/Lower Center Line - Bob’s Special
- Replies: 7
- Views: 76232
Re: Mold Fair? & Upper/Lower Center Line - Bob’s Special
I use Google Photos, free and works fine and it doesn't have the bad history that PB does. If you go to the beginning of that thread I linked you, it is a detailed build, start to finish, posted specifically for newer builders, showing build techniques. Other experienced builders also chime in with ...
- Tue Feb 21, 2023 2:03 pm
- Forum: Builders' Forum
- Topic: Mold Fair? & Upper/Lower Center Line - Bob’s Special
- Replies: 7
- Views: 76232
Re: Mold Fair? & Upper/Lower Center Line - Bob’s Special
Please ask as required, we can keep thrashing this about till it gets where it needs to be. I just hope the idea that you can basically lift that form a bit in the corner to adjust the top alignment without losing the bottom alignment, is clear. Even on the most carefully aligned SBs, this can be re...
- Tue Feb 21, 2023 11:47 am
- Forum: Builders' Forum
- Topic: Mold Fair? & Upper/Lower Center Line - Bob’s Special
- Replies: 7
- Views: 76232
Re: Mold Fair? & Upper/Lower Center Line - Bob’s Special
I can get at the Photos, but I would recommend you avoid PB at all costs Suggestions 1) if you don't have a copy of CanoeCraft, think about getting one, there is a whole step by step section on setting up the molds 2) the Strongback has to be marked with a center line and the station line locations ...
- Tue Feb 21, 2023 9:56 am
- Forum: Builders' Forum
- Topic: Mold Fair? & Upper/Lower Center Line - Bob’s Special
- Replies: 7
- Views: 76232
Re: Mold Fair? & Upper/Lower Center Line - Bob’s Special
Hi Ryan, When checking for fair, the batten will likely only ever hit flat on the middle mold, on all the rest the batten is going to be curving to the bow/stern, so it should only hit the corner of each mold, nearest the end it is going to. Those mold edges run parallel with the the strongback, whi...
- Sun Feb 19, 2023 9:58 am
- Forum: Builders' Forum
- Topic: Wood for first build
- Replies: 4
- Views: 64691
Re: Wood for first build
Hi Charles, You are in what i consider the prime area for getting wood, finding those wood sources is definitely one of the biggest challenges IMO, for that first build. When you consider your build, one of the first things you need to think about, is what you intend to do with the boat. That list o...