I just got a shipment of silicon-bronze carriage bolts from this fellow. he shows 6" long available.
© Top Notch Fasteners [tnfasteners.com] All Rights Reserved.
Top Notch Fasteners
1044 South Victory Drive Suite 100
Mankato, MN 56001
Fax 507 720-0082
Search found 5 matches
- Fri Sep 21, 2018 9:43 am
- Forum: Builders' Forum
- Topic: brass screws for hanging seats
- Replies: 12
- Views: 6790
- Fri Aug 31, 2018 1:26 pm
- Forum: Builders' Forum
- Topic: 2 1/2 coats of epoxy and glass successful; questions on next coat
- Replies: 5
- Views: 766
2 1/2 coats of epoxy and glass successful; questions on next coat
Thanks for all the advice on working with epoxy during hot weather. The cloth soaked out quickly. The epoxy set up very quick; 20 minutes to soft barely caramel like state. Almost couldn't use the squeegee due to extreme thick viscosity by that short time. I put an extra 6" wide skid plate of g...
- Tue Aug 14, 2018 11:47 am
- Forum: Builders' Forum
- Topic: Fiberglass & epoxy application during very hot weather?
- Replies: 8
- Views: 3734
Re: Fiberglass & epoxy application during very hot weather?
Thanks Brian,
You answered a question I had in my mind. My manufacturing of the strips produced poor fits between courses of strips. I will be using your filling technique often.
You answered a question I had in my mind. My manufacturing of the strips produced poor fits between courses of strips. I will be using your filling technique often.
- Sun Aug 12, 2018 10:20 am
- Forum: Builders' Forum
- Topic: Fiberglass & epoxy application during very hot weather?
- Replies: 8
- Views: 3734
Re: Fiberglass & epoxy application during very hot weather?
Fairing the hull-3.JPG Outer stem-2.JPG Thanks so much for all your advice. I will be testing the epoxy on scrap today. I love the suggestion to control sweat, sedges. Yesterday as I was fitting and shaping and refitting the stem the sweat was running off the end of my nose like a waterfall. Here i...
- Tue Aug 07, 2018 6:22 pm
- Forum: Builders' Forum
- Topic: Fiberglass & epoxy application during very hot weather?
- Replies: 8
- Views: 3734
Fiberglass & epoxy application during very hot weather?
Thanks to all for your posts. They have helped me immensely during my Ranger 15 build. Where I am building is my garage which is not heated or cooled. The current temperatures have been in the high 90s F and low 100s for the last few weeks and expected to stay the same throughout the time I plan to ...