Search found 1480 matches
- Wed Nov 03, 2004 12:22 pm
- Forum: Builders' Forum
- Topic: Steam Box
- Replies: 10
- Views: 7361
We built following steamer out of a bucket, funnel and PVC pipe sealed with strips of spounges (between bucket, funnel and pipe). The top of the pipe simply was plugged with a rag. Sitting on top of the gas grill and leaning up against the side of the garage, it did a fine job. Water that condensed ...
- Tue Nov 02, 2004 9:48 am
- Forum: Builders' Forum
- Topic: Strip pattern
- Replies: 7
- Views: 3472
- Tue Nov 02, 2004 7:20 am
- Forum: Builders' Forum
- Topic: Strip pattern
- Replies: 7
- Views: 3472
- Thu Oct 28, 2004 9:37 pm
- Forum: Builders' Forum
- Topic: Advice on Butt Joints
- Replies: 18
- Views: 24695
- Thu Oct 28, 2004 8:54 am
- Forum: Builders' Forum
- Topic: Strip orientation
- Replies: 2
- Views: 3730
Strip orientation
This might be a dumb question or one I should have asked earlier... We are building a redbird and have started the stripping process with the lightest wood in our bundle. We will move to the darker wood as we progress toward the bottom of the canoe. We've used up all the clear light strips and are a...
- Wed Oct 27, 2004 11:35 am
- Forum: Builders' Forum
- Topic: Advice on Butt Joints
- Replies: 18
- Views: 24695
- Tue Oct 26, 2004 11:24 pm
- Forum: Builders' Forum
- Topic: Advice on Butt Joints
- Replies: 18
- Views: 24695
- Tue Oct 26, 2004 9:57 pm
- Forum: Builders' Forum
- Topic: Advice on Butt Joints
- Replies: 18
- Views: 24695
- Wed Oct 13, 2004 2:23 pm
- Forum: Builders' Forum
- Topic: Advice on Butt Joints
- Replies: 18
- Views: 24695
Wow, Quick response. Thanks Jeff for the insights. I had been planning on building each of the strips up one at at time and putting them on the canoe one at a time. Given that, I wasn't worried about following the curve of station 0. I was worried about each of the joints in the assembled strips (as...
- Wed Oct 13, 2004 1:32 pm
- Forum: Builders' Forum
- Topic: Advice on Butt Joints
- Replies: 18
- Views: 24695
Advice on Butt Joints
This is my first post on this very helpful system (thanks for all the contributions- I've learned alot). My son (Patrick Pfeifer) and I are building a Redbird. We have begun the stripping process (just 2 strips) but would like to add an accent to the sides. A pattern has been offered (by mom) to bui...