Search found 676 matches
- Thu Jul 21, 2011 12:34 pm
- Forum: Builders' Forum
- Topic: unusual additional tool for laying cloth/resin work
- Replies: 5
- Views: 7969
Re: unusual additional tool for laying cloth/resin work
I've used them. They work well for getting any bubbles out of the layup.
- Mon Jul 11, 2011 6:28 pm
- Forum: Builders' Forum
- Topic: New Canoe Build
- Replies: 16
- Views: 13771
Re: New Canoe Build
Moonman, I'll see if I can find butternut around here to look at it. I'm going to guess that it's going to be hard to find. Is it lighter than ash? Randy, I'm also interested in how my experience with the carbonfiber goes. :) I talked to the folks at U.S. Composites, and they set me up with a type t...
- Fri Jul 08, 2011 10:18 am
- Forum: Builders' Forum
- Topic: New Canoe Build
- Replies: 16
- Views: 13771
Re: New Canoe Build
Glass and carbonfiber and dye ordered! I just need to mill a few more boards and cut forms. Wooohooo! A new canoe is on the way.
- Tue Jul 05, 2011 12:39 am
- Forum: Builders' Forum
- Topic: New canoe
- Replies: 10
- Views: 5577
Re: New canoe
I've used pine and eastern white cedar with success. Both seems easy to sand when surrounded by red cedar.
- Tue Jul 05, 2011 12:38 am
- Forum: Builders' Forum
- Topic: New Canoe Build
- Replies: 16
- Views: 13771
Re: New Canoe Build
Thanks for the feedback. Tumblehome: I debated more, but with more the slight flare at the bow looks goofy or it has to go away. I actually think there's more tumblehome in this boat than the original Prospector. Dye: I just love the look of a dyed boat after I used dye on my Iggy kayak. I've used S...
- Sat Jul 02, 2011 10:00 am
- Forum: Builders' Forum
- Topic: New Canoe Build
- Replies: 16
- Views: 13771
New Canoe Build
I'm building a boat, and I'm debating between a canoe and a kayak. I haven't really decided yet, but I'm leaning towards canoe, because I can build it much quicker. It's going to be an outside build, so I have to be able to get it stripped, sanded, dyed and glassed within a weather window. So far, I...
- Sat May 07, 2011 1:06 pm
- Forum: Builders' Forum
- Topic: Cockpit Recess
- Replies: 5
- Views: 3178
Re: Cockpit Recess
Sweet looking recess, Glen. You can also get the coaming lip lower by inserting a plywood cockpit pattern inside the recess cutout at the height you want and then stripping down to the plywood. I wrote about the kayak cockpit recess process that I use in slightly more details on my website. http://w...
- Fri Apr 29, 2011 4:44 pm
- Forum: Builders' Forum
- Topic: Solo Canoe Portage Yoke
- Replies: 5
- Views: 6397
Re: Solo Canoe Portage Yoke
The bungee cord works great. I portaged it around with it on and it holds it in place good enough that I would have no problems trusting it on a rough and long portage.
Plans for this: Solo Canoe Yoke
Plans for this: Solo Canoe Yoke
- Wed Apr 27, 2011 8:18 am
- Forum: Builders' Forum
- Topic: Solo Canoe Portage Yoke
- Replies: 5
- Views: 6397
Re: Solo Canoe Portage Yoke
I usually have a bungee cord next to my seat for various reasons -- you can see it in the picture. I tried that to hold the yoke in place. It works perfect. This is a really nice yoke. I like it much better than my clamp-on version.
- Sun Apr 24, 2011 4:30 pm
- Forum: Project Directories
- Topic: Freedom Solo 15' 3" or 16' 2"
- Replies: 97
- Views: 394147
Re: Freedom Solo 15' 3" or 16' 2"
I'm just a little curious about the tippy feeling. Is that in relation to other solo canoes?
- Sun Apr 24, 2011 4:05 pm
- Forum: Builders' Forum
- Topic: Solo Canoe Portage Yoke
- Replies: 5
- Views: 6397
Solo Canoe Portage Yoke
I just finished building a solo canoe portage yoke that was talked about somewhere in this thread . It works really well as long as you use pads. Otherwise, the canoe sits down low and obscures the view. With the yoke pads, it's up high enough to get a good view. The canoe also seems to ride just a ...
- Tue Mar 01, 2011 5:47 pm
- Forum: Builders' Forum
- Topic: Thoughts on seat depth
- Replies: 5
- Views: 7909
I hang mine about 11 inches from the keel to the top of the seat. It's high enough to get my feet under if I feel like I need more stability, such as in rough water, but low enough that the boats still feel stable. I lower the front of my seats by about 1 inch. It feel more comfortable to me, and ma...
- Fri Jan 07, 2011 12:22 am
- Forum: Builders' Forum
- Topic: Uni-wale?
- Replies: 85
- Views: 142074
- Sat Dec 18, 2010 4:02 pm
- Forum: Builders' Forum
- Topic: Uni-wale?
- Replies: 85
- Views: 142074
Bryan, while your prototype drawing based on the photo from Moonman looks fine, I have some difficulty visualizing whether or not this design will work well from a balance point of view, plus the seat may end up uncomfortably close to your back and neck during portaging. What if the seat consisted ...
- Sun Dec 05, 2010 6:12 pm
- Forum: Builders' Forum
- Topic: Uni-wale?
- Replies: 85
- Views: 142074
Moonman - Do you think that the torque from the portage yoke would be more force than body weight? My solo canoe weighs 32 lbs. and I weigh 200. I imagine my body weight would be worse on the seat, but I guess I'm not sure how much force comes from the bow and stern swinging around in the air. mdeve...