Search found 121 matches
- Wed May 07, 2014 9:56 am
- Forum: Project Directories
- Topic: Freedom Solo 15' 3" or 16' 2"
- Replies: 97
- Views: 296276
Re: Freedom Solo 15' 3" or 16' 2"
wow cruiser, based on that video i'd say the freedom makes my bob's seem kinda lumbering. it certainly looks a lot more nimble.
- Mon Apr 21, 2014 11:36 pm
- Forum: Builders' Forum
- Topic: Titebond 3
- Replies: 20
- Views: 21826
Re: Titebond 3
having used both of those titebonds in my build, and finding they both work well, the one crucial piece of advice i can pass on is to take the time to make sure that you wipe the excess glue off, particularly on the inside, and pay attention to the sides of the station moulds. both are a pain to san...
- Wed Apr 16, 2014 11:16 pm
- Forum: Builders' Forum
- Topic: Titebond 3
- Replies: 20
- Views: 21826
Re: Titebond 3
i used both titebond i and titebond iii on my build. i knew that titebond i would be more than adequate for the job, it was more a case of colour. titebond i was a closer match to the paulownia, and titebond iii was a better match for the red cedar. i found that having the longer dry time could be u...
- Sun Mar 30, 2014 3:47 am
- Forum: Builders' Forum
- Topic: splinters - the final chapter
- Replies: 3
- Views: 2599
Re: splinters - the final chapter
IT'S A BOAT!!!!!!!!! :dancing we had some good weather after a week of rain, i had all my ropes sorted and new padding on the roof racks. off to the lake i went for it's first look at water. it didn't come flying off the roof and get run over by a semi. :applause i had all my stuff ready, or so i th...
- Mon Mar 24, 2014 7:29 am
- Forum: Builders' Forum
- Topic: splinters - the final chapter
- Replies: 3
- Views: 2599
splinters - the final chapter
when i first started my build, i thought it would only take a few months to complete it. canoe craft and the "build a boat" bob's special article made it seem like it would be so easy. yeh, well <insert raspberry smiley here>. i started building the stems mid 2011. now it's finally done! :...
- Mon Mar 17, 2014 5:14 am
- Forum: Boat-Building Tips & Techniques
- Topic: spraying water based polyurethane
- Replies: 5
- Views: 17961
Re: spraying water based polyurethane
Years ago I saw a rub on polyurethane finish, that a Canadian was using, we couldn't get it in the states. Something about a cancer causing ingredient, if my memory serves me. Jim yeh, getting back to the topic of the thread, ie "spraying", i checked the spec sheet for that product, glen....
- Tue Mar 11, 2014 9:30 am
- Forum: Boat-Building Tips & Techniques
- Topic: spraying water based polyurethane
- Replies: 5
- Views: 17961
spraying water based polyurethane
originally when i started my build, i planned on finishing it off with 2k automotive clear coat. that's what i'm most familiar with. two downsides to this are a) the time it takes to touch dry means that when spraying outside the chances of bugs or other things settling on the surface is increased, ...
- Thu Mar 06, 2014 5:44 am
- Forum: Builders' Forum
- Topic: Building the Mattawa - a small tandem canoe
- Replies: 6
- Views: 3139
Re: Building the Mattawa - a small tandem canoe
Really nice boat. We looked at the Bob's, how do you like it? How much did it end up weighing? i still need to put the final coats of clear on the outer hull so i have no idea how it handles. as for weight, i'm guessing a kg or two heavier than the mattawa. the strips, inner and outer stems glassed...
- Thu Mar 06, 2014 5:06 am
- Forum: Paddles, Techniques, Boat Transportation, Storage & Maintenance
- Topic: what else do i need?
- Replies: 3
- Views: 11624
Re: what else do i need?
thanx guys :) jim: no crocs where i am, but once i get a feel for the boat and a bit of confidence i'll be using it for what i built it for... fishing in the estuaries both salt and fresh water reaches. yeh.. no crocs, but bull sharks :tu as for the place for my first paddle , whilst my entry point ...
- Tue Mar 04, 2014 12:15 pm
- Forum: Builders' Forum
- Topic: Building the Mattawa - a small tandem canoe
- Replies: 6
- Views: 3139
Re: Building the Mattawa - a small tandem canoe
nice looking boat! reading the build page, the requirements your gf had were the same as mine, with the addition that i wanted to fish out of it. my answer was the bobs special. the width issue was less of a problem because, being symmetrical, sitting in the front seat facing backward meant it was n...
- Tue Mar 04, 2014 2:18 am
- Forum: Paddles, Techniques, Boat Transportation, Storage & Maintenance
- Topic: what else do i need?
- Replies: 3
- Views: 11624
what else do i need?
welp, i need to scrape the drips (long story), sand the outer hull and throw on another couple of coats of clear then splinters will be ready for the water. i have my pfd, whistle, spare paddle, bailer, throw bag, first aid kit and water bottle. i'm planning on putting some closed cell foam mat on t...
- Tue Feb 11, 2014 12:38 am
- Forum: Builders' Forum
- Topic: Scratches
- Replies: 4
- Views: 2878
Re: Scratches
If you have a soldering iron you can use that instead of a clothes iron so you will be able to concentrate the heat to just the scratches. a word of warning. be careful with a soldering iron. whilst it can be a precise tool for applying heat , if you linger in one spot for too long you will scorch ...
- Sun Feb 09, 2014 4:40 am
- Forum: Builders' Forum
- Topic: look after your timber!
- Replies: 0
- Views: 13505
look after your timber!
not all of us are lucky enough to have a place indoors to store our timber. luckily for me i do at least have a place that's under cover. all of my strips and any timber that's already been cut into pieces narrow enough to fit into a 90mm pvc drain pipe tube gets put in those with screw caps to prot...
- Tue Jan 14, 2014 6:59 am
- Forum: Off Topic
- Topic: lars monsen canoe and survival video
- Replies: 2
- Views: 14431
Re: lars monsen canoe and survival video
clearly lars is just there to provide the commentary... foss is obviously the real star of this series
- Sun Jan 05, 2014 6:39 pm
- Forum: Choosing a Design
- Topic: I need a little insight.please.
- Replies: 8
- Views: 15440
Re: I need a little insight.please.
in terms of a fairly easy build you might want to consider the bob's special. i'm no wood worker, but i think the fact that it has fairly gentle lines means there's no severe twisting or shaping to deal with. my original intent was for a boat i could fish from and handle solo. i'm not sure what the ...