The Bear Mountain Boat Shop

hey Jim thanks a lot . the sides do not have any type of a pattern , but I'll try to upload a photo when I get home

thanks Brian

Brian thanks I want to pick your brain a minute If im following you are you suggesting having the bottom of the diamond curved to match the planking from the turn of the hull? here is a pic of the diamond lower on the canoe http://i1302.photobucket.com/albums/ag131/Randy_Baird/IMG_0005_zps2gxqspbq.j...

I posted my football earlier and have finally decided on how to finish the pattern I'm just not sure which way so please vote for your favorite #1 http://i1302.photobucket.com/albums/ag131/Randy_Baird/IMG_0012_zpskqroeau7.jpg?1431748426760&1431748430287 http://i1302.photobucket.com/albums/ag131/...

thanks for the replies and help
I wanted to do a little more in the middle alick maybe I'll borrow a little of your design which looks awesome
randy

I just finished my detail on my football and need to continue stripping, I now I am supposed to continue up to the center line and then cut it. My concern is trying to make sure the strips are running parallel and not at a weird angle to each other. I was thinking of starting at the center line and ...

I don't know what went wrong when I cut out the molds they were screwed together then sanded to the line with a 10" disc sander as a unit My strong back is flat and level I took off the molds and layed them up to their counter parts and they match up This dip is just on 1 side of the canoe not ...

Thanks guess I'm on hold for awhile as I'm adding bead and cove

My planer just died, I just started planing my strips so not far into it only a few strips done and my planer just fried the motor. Right now its impossible for me to replace it or the motor. My strips are just over 1/4" and of course with some variation from the ripping process,so cai continue...

About to mount my molds and noticed my stem mold sits about 3/4" below the top of stem 7 am I correct to assume the inner stem is the reason why?
Thanks randy

Sorry figured it out looked at the originals and noticed the green lines for station 2 didn't copy over
Thanks for your help
Randy

Thanks I'm going to have to look at my plans again as I'm not seeing another section to make mold #2, the number is there but no reference line is maybe station 0 and 1 the same

I'm cutting out my station molds and is it safe to assume stations 1 and 2 are the same size?
Thanks Randy

Sorry been looking for awhile but can't seem to find it I'm building the nomad and am ready to get my wood, can anyone tell me about how much lumber do I need? I'm planning on ripping and putting on my own bead and cove.
Thanks
Randy