Out of the shop and into the water, finaly
-
- Posts: 66
- Joined: Tue Jul 27, 2004 9:25 pm
- Location: Central Calif. foothills
Out of the shop and into the water, finaly
My 15 ft Prospector Ranger was completed (well, almost) and hit the water at a
nearby lake the 28th of June. I was dumped the first time I tried to enter (from a
dock). But, that was good as it did get my attention and thereafter I paid more
attention to what I was doing and might as well get it over with and begin enjoying
the canoe.
I am very pleased with the performance of the canoe, but, do feel that I have some
adjustments to make in the location of the seats, paddle lengths, etc. We (the canoe
and I) have been out three times and we are getting used to each other.
Looks like it will be a long and pleasant friendship
Now, if the 100+ heat will cooperate and drop some we will get out and have some
more fun.
Photo attached. I HOPE.
-
- Posts: 66
- Joined: Tue Jul 27, 2004 9:25 pm
- Location: Central Calif. foothills
No photo !!!
:embarassed
Well, the photo did not make it.
I will try again, later.
Well, the photo did not make it.
I will try again, later.
-
- Posts: 66
- Joined: Tue Jul 27, 2004 9:25 pm
- Location: Central Calif. foothills
photo try, again ????
:frightened
another try at adding phots.
This was approx the 10th try to load the pic. Just will not work.
any suggestions out there ????????????
another try at adding phots.
This was approx the 10th try to load the pic. Just will not work.
any suggestions out there ????????????
- Glen Smith
- Posts: 3719
- Joined: Sat May 08, 2004 9:08 am
- Location: Baie-St-Paul, Quebec, Canada
-
- Posts: 66
- Joined: Tue Jul 27, 2004 9:25 pm
- Location: Central Calif. foothills
Lets try again
:embarassed
lets try again
lets try again
-
- Posts: 66
- Joined: Tue Jul 27, 2004 9:25 pm
- Location: Central Calif. foothills
How about that
Well sucess at last. Finally posted a pic.
Sorry, that it is to large. Now I will work on that.
I still have at least one question, Glen.
When, as your instructions say, go to properties after rt. clicking the
photo, Properties will not allow any entry to that window. So, why
go there ??? or what am I missing ???
:
Thanks to all for their patience with my computer expertise. JUST
KIDDING
Sorry, that it is to large. Now I will work on that.
I still have at least one question, Glen.
When, as your instructions say, go to properties after rt. clicking the
photo, Properties will not allow any entry to that window. So, why
go there ??? or what am I missing ???
:
Thanks to all for their patience with my computer expertise. JUST
KIDDING
- Glen Smith
- Posts: 3719
- Joined: Sat May 08, 2004 9:08 am
- Location: Baie-St-Paul, Quebec, Canada