Freedom 15 plans

Welcome to the new Bear Mountain Builders Forum - an interactive internet service we provide to encourage communication between canoe and kayak builders
Post Reply
Bill Bach
Posts: 2
Joined: Wed Dec 12, 2007 4:44 pm

Freedom 15 plans

Post by Bill Bach » Thu Dec 13, 2007 10:38 pm

On my recently purchased plans for the Freedom 15' two of the aft stations, #10 & #11 are color coded.
#10 is outlined in green & #11 is outlined in red. Is there any reason for this?

Best,
Bill

User avatar
Patricks Dad
Posts: 1378
Joined: Wed Oct 13, 2004 1:11 pm
Location: Warrenville, Illinois

Post by Patricks Dad » Thu Dec 13, 2007 10:46 pm

don't think so. I recall that my plans were similarly colored. I can't find them right now. I photocopied them so I could cut them up for use. No apparent loss of value without the color.
Randy Pfeifer
(847) 341-0618
Randy.Pfeifer1@gmail.com

Steve
Posts: 22
Joined: Mon Jul 09, 2007 9:47 am
Location: Manchester , United Kingdom

Station Mold Colors

Post by Steve » Fri Dec 14, 2007 2:52 am

Hi Bill,
You are quite right the aft station molds are colored, if you look close you'll notice that they are, black,red blue & green. I can only imagine that its because they some of them converge to almost the same point at the keel line if you see what i mean, the seperate colors try to make them easey to identify at that point. I hope i have helped because i had the same issue on my set of plans, & this is the only reason i could come up with, unless anyone else has other suggestions?
Best Regards
Steve :thinking
I'm not as good as I once was, but I'm as good once as I ever was !!

Bill Bach
Posts: 2
Joined: Wed Dec 12, 2007 4:44 pm

Post by Bill Bach » Fri Dec 14, 2007 11:48 am

Thanks all for the quick replies!

Bill

User avatar
Joan and Ted
Site Admin
Posts: 63
Joined: Wed May 05, 2004 10:58 am
Location: Peterborough, Ontario
Contact:

Post by Joan and Ted » Fri Dec 14, 2007 11:49 am

The colours are to help you differentiate the lines .......Joan

Post Reply