Guideboat rib and stem drawings

Welcome to the new Bear Mountain Builders Forum - an interactive internet service we provide to encourage communication between canoe and kayak builders
Post Reply
User avatar
John Michne
Posts: 116
Joined: Sun May 09, 2004 7:36 am
Location: Clifton Park, NY
Contact:

Guideboat rib and stem drawings

Post by John Michne »

If anyone is building, considering building, or knows someone who is or planning or building an Adirondack guideboat like the ones seen on the left, I have full-size rib and stem drawings available at no cost. I made these drawings using a free CAD program that does not permit business use. Both the rib set and stem drawings are pdf files, and when taken or sent to a print shop like Office Max, will print full size on 24 x 36-inch paper.
The ribs and stem are from the original data by John Gardner of a Grant guideboat, first published in 1980.
Email me for the drawings.
John
User avatar
Juneaudave
Posts: 522
Joined: Sat May 08, 2004 12:42 pm
Location: Juneau, Alaska
Contact:

Post by Juneaudave »

John...That is extremely generous. I can't tell you how much your website and advice is valued...Dave
Post Reply