Sealing Staple Holes

Welcome to the new Bear Mountain Builders Forum - an interactive internet service we provide to encourage communication between canoe and kayak builders
Post Reply
Hopkinsstevea
Posts: 1
Joined: Tue Aug 16, 2011 6:41 am

Sealing Staple Holes

Post by Hopkinsstevea »

Hi everyone this is my first post and I thought I might pass on a trick I learned while cold molding my sailboat. I found that applying boiling water with a squeegee will seal up the staple holes. I assume it should also work with a Canoe (wood is wood) it does work very well on a cold molded hull.
Post Reply