can I use water resistant glue such as titebond3 to glue the plugs into the stems where the screws were removed, or should they be glued in with epoxy. I figured the end of the stem will get coated in epoxy anyway.
Any thoughts?
gluing pegs into stems
- HighPlainsDrifter
- Posts: 77
- Joined: Tue Mar 22, 2011 9:30 pm
- Location: Brookings, SD USA
Re: gluing pegs into stems
I have used and will use epoxy to peg the holes.
Re: gluing pegs into stems
Usually just cut the plugs level, sand, and epoxy after. The epoxy will lock it in place.
Denis
Denis
-
- Posts: 28
- Joined: Fri Apr 06, 2012 1:16 pm
Re: gluing pegs into stems
I appreciate the help, thanks.
I have a small problem with impatience, so I just glued them in with titebond3 gave them an hour or so and I was on to shaping them.
Thanks again
Backpaddler
I have a small problem with impatience, so I just glued them in with titebond3 gave them an hour or so and I was on to shaping them.
Thanks again
Backpaddler