What are the opinions on cutting scuppers into scarf joints?
My scarf tapers were cut at an angle of 1:8 and I did not want to weaken this joint by removing ¼” of material with a scupper cut.
Cutting scuppers into a scarf joint ?
- HighPlainsDrifter
- Posts: 77
- Joined: Tue Mar 22, 2011 9:30 pm
- Location: Brookings, SD USA
- Glen Smith
- Posts: 3719
- Joined: Sat May 08, 2004 9:08 am
- Location: Baie-St-Paul, Quebec, Canada
Re: Cutting scuppers into a scarf joint ?
A glued joint is supposed to be stronger than the surronding wood so it shouldn't be problematic.