Anyone in Durham/Toronto/Peterborough need cedar strips?

Welcome to the new Bear Mountain Builders Forum - an interactive internet service we provide to encourage communication between canoe and kayak builders
Post Reply
WhitbyAlex
Posts: 2
Joined: Sat Jun 29, 2013 7:52 am

Anyone in Durham/Toronto/Peterborough need cedar strips?

Post by WhitbyAlex »

I gave up on my canoe a couple of years ago and got rid of it and the forms, but I still have enough strips to build 1-2 canoes. They are all 16 to 17 feet long, as I had planned on building the freedom 17. The wood is Western Red Cedar, select and better or CLEAR, some strips have minimal knots ie. 1/8" but mostly all clear. If anyone out there wants to check them out give me a ring at (NINE O FIVE-391-1305 . If they are worth anything make me an offer. I don't expect much like $100 or so.

The strips are all .75" x .235-.250" which I believe is within tolerance. They were milled using the Lee Valley canoe bits. I'd like them gone ASAP so I can set up a work bench.
You do not have the required permissions to view the files attached to this post.
WhitbyAlex
Posts: 2
Joined: Sat Jun 29, 2013 7:52 am

Re: Anyone in Durham/Toronto/Peterborough need cedar strips?

Post by WhitbyAlex »

For those still calling they are SOLD. Thank you for your interest.
Post Reply