Rob Roy

Welcome to the new Bear Mountain Builders Forum - an interactive internet service we provide to encourage communication between canoe and kayak builders
Post Reply
Andre
Posts: 1
Joined: Sun Dec 20, 2015 10:47 am

Rob Roy

Post by Andre » Mon Dec 21, 2015 10:24 am

Just started building a Rob Roy Solo. After having built and finished a 17' Endeavour in March of this year a 13' canoe seems easy and pleasant to build.

Anyone ever built a Rob Roy? I am curious about what you would have selected as a seat.

Andre,
Black Point, Nova Scotia
Rob Roy week 1.jpg
You do not have the required permissions to view the files attached to this post.

alick burt
Posts: 255
Joined: Wed Sep 07, 2005 2:41 am
Location: united kingdom
Contact:

Re: Rob Roy

Post by alick burt » Wed Dec 23, 2015 12:22 pm

I haven't built a Rob Roy but I think I have seen them with a seat that is fixed directly to the bottom of the hull with blocks.
Cheers
Alick :wink

hughhallhh56
Posts: 37
Joined: Fri Feb 13, 2015 7:51 pm

Re: Rob Roy

Post by hughhallhh56 » Sat Jan 23, 2016 7:55 pm

I built two of them last year. I mounted my seats to the bottom with epoxy and a support in the middle.

Here is a picture of the finished canoe showing the seat location and the back support.

download/file.php?id=225&mode=view


I used a simple seat based on Jim Dodds pictures that uses snowshoe nylon flat tubing.

http://i1272.photobucket.com/albums/y39 ... eazmlf.jpg
http://i1272.photobucket.com/albums/y39 ... qbjk92.jpg

Have fun.

Hugh

Rick in Pender Harbour
Posts: 44
Joined: Tue Mar 01, 2005 11:25 am
Location: Pender Harbour bc
Contact:

Re: Rob Roy

Post by Rick in Pender Harbour » Sun Jan 24, 2016 12:10 pm

I have built more than a dozen wee lassies, always use a support on the bottom, and pre-woven cane from Lee Valley pressed into a groove in the frame with a spline. It's quick, looks good, and is easy to replace (in 10 years or so) when you need to. use a backrest suspended from the thwart and straps back from the gunwales, and a dowel for a footrest.
Rgds

Rick
oysterbayboats.ca

Post Reply