Varnish

Welcome to the new Bear Mountain Builders Forum - an interactive internet service we provide to encourage communication between canoe and kayak builders
Post Reply
JesseP
Posts: 46
Joined: Fri Apr 10, 2015 11:13 am
Location: East Central, AB

Varnish

Post by JesseP » Mon Feb 22, 2016 7:49 pm

Hey everyone its me again.

My epifanes Varnish and thinner just showed up on my door step and i'm eager to start glossing this thing!!

Any advice before I start?

What mix should I use?, Method of applying? Tried and true methods?

Thanks again everyone! You've all been great helps

JP
I'm up to my torch.

User avatar
Cruiser
Posts: 625
Joined: Sat Apr 27, 2013 10:21 am
Location: Bowmanville, Ontario

Re: Varnish

Post by Cruiser » Mon Feb 22, 2016 8:32 pm

Question #3 gives their suggestions:

http://ru.epifanes.com/qanda.htm

I thin up to 50% first coat, 20-25% second and about 10-15 % on the third. Anything after that would be 5-10%.




Brian

User avatar
Jim Dodd
Posts: 1178
Joined: Wed Feb 08, 2006 11:08 pm
Location: Iowa

Re: Varnish

Post by Jim Dodd » Tue Feb 23, 2016 9:31 am

Thanks for the link Brian !
Great info !

I've always felt my finishes were sub par. Hopefully I'll improve.

Jim
Keep your paddle wet and your seat dry!

JesseP
Posts: 46
Joined: Fri Apr 10, 2015 11:13 am
Location: East Central, AB

Re: Varnish

Post by JesseP » Tue Feb 23, 2016 9:49 am

Brain Thanks A lot for the link that is exactly what I was looking for.

As always this forum to the rescue.

Thanks again.
I'm up to my torch.

Post Reply