15' Ranger layout from purchased plans

Welcome to the new Bear Mountain Builders Forum - an interactive internet service we provide to encourage communication between canoe and kayak builders
Post Reply
rondo
Posts: 1
Joined: Sun Aug 14, 2016 9:58 am

15' Ranger layout from purchased plans

Post by rondo » Sun Aug 14, 2016 12:34 pm

In laying out the purchased 15' Ranger plans on plywood, it appears as if stations 0-4 heights, with extensions, exceed 24". This means that cutting a 4x8 sheet into 2-2x8 pieces is not appropriate. Is it possible to take 3/4" off the overall height at the baseline, so that the plan will fit on a 2'x8' piece of plywood?

Rondo

User avatar
Patricks Dad
Posts: 1378
Joined: Wed Oct 13, 2004 1:11 pm
Location: Warrenville, Illinois

Re: 15' Ranger layout from purchased plans

Post by Patricks Dad » Mon Aug 15, 2016 11:48 am

I would suggest you not do that. Just lay out your stations on the full 4x8' sheet and cut the out from there. No need to rip the sheet first.
Randy Pfeifer
(847) 341-0618
Randy.Pfeifer1@gmail.com

Post Reply