Bob's Special Half Breadth quesition

Welcome to the new Bear Mountain Builders Forum - an interactive internet service we provide to encourage communication between canoe and kayak builders
Post Reply
Morecowbell
Posts: 48
Joined: Sat Jun 28, 2014 10:41 am

Bob's Special Half Breadth quesition

Post by Morecowbell »

Hi all,

In lofting the Bob's Special I've got a point that looks off. Not a huge deal but curious if someone might know. Its the half breadth on #3 at 8". Looks to be about 1/16" wide. Of course it could be the points above or below but from the general look of things that seems to be the culprit. No correction for this point on the correction table so just wondering - thanks!

Clay
User avatar
Cruiser
Posts: 867
Joined: Sat Apr 27, 2013 10:21 am
Location: Bowmanville, Ontario

Re: Bob's Special Half Breadth quesition

Post by Cruiser »

Hi Clay,

This link was posted in the forums for lofting corrections, I think there are some for your boat.


http://web.archive.org/web/201211081136 ... estems.htm



Brian
Post Reply