Oil or Varnish Finish

Post questions & answers about; paddle selection, building and maintenance; paddling techniques; boat transportation, storage & maintenance.
User avatar
Glen Smith
Posts: 3719
Joined: Sat May 08, 2004 9:08 am
Location: Baie-St-Paul, Quebec, Canada

Post by Glen Smith » Thu Jul 10, 2008 8:38 pm

Thanks Brian, I will have to try that on my next paddle.

Stencil
Posts: 43
Joined: Tue Feb 26, 2008 9:01 am

Post by Stencil » Sun Jul 13, 2008 8:33 am

I like the old oil, varnish, thinner combined in thirds. Wipe on let sit till just tacking up and wipe off. Wet sand between coats with 400 grit. Spar varnish, watco style oil or linseed and turps or mineral spirit. Hand rubbing with a cotton rag brings up the luster. As many coats as you like. This avoids the high shine encased in plastic look of some varnishes and does not chip or peel. Looks good and maintenance is as easy as slapping on more finish and repeat. You can add more varnish proportionately in later coats to build the finish.
S
Happy waters all.

Post Reply