strip thickness

This is the place for everything that doesn't fit elsewhere.
Post Reply
Posts: 1
Joined: Sun Jun 26, 2011 4:53 am

strip thickness

Post by Slagt » Sun Jun 26, 2011 5:07 am

After building a planked strip 12” motor canoe, I am now considering to build an 18” Indian Runner (with a diesel engine).
In the plan I read that 30mmX18mm strips are used. I prefer to work with thinner strips, as stripping the hull will be much easier. If I apply fiberglass on both the inside and the outside, can I safely reduce the thickness of the strips (western red cedar)?

User avatar
Glen Smith
Posts: 3719
Joined: Sat May 08, 2004 9:08 am
Location: Baie-St-Paul, Quebec, Canada

Re: strip thickness

Post by Glen Smith » Sun Jun 26, 2011 12:02 pm

Using fiberglass will allow you to reduce the thickness of the strips but by how much, I do not know.

Post Reply