Bostitch staple puller

If you know a good tip or technique to help get through a construction "stumbling block", please post it here. If you have questions concerning building problems, please post them on the "Builders' Forum".
Post Reply
User avatar
Jim Dodd
Posts: 1173
Joined: Wed Feb 08, 2006 11:08 pm
Location: Iowa

Bostitch staple puller

Post by Jim Dodd » Sat Jan 18, 2014 4:25 pm

I've used these for years. They work great, and are a quality tool very reasonably priced.Image



Jim
Last edited by Jim Dodd on Wed Jul 29, 2015 8:44 pm, edited 1 time in total.
Keep your paddle wet and your seat dry!

User avatar
Jim Dodd
Posts: 1173
Joined: Wed Feb 08, 2006 11:08 pm
Location: Iowa

Re: Bostitch staple puller

Post by Jim Dodd » Sat Jan 18, 2014 4:29 pm

A tip to use these pullers, is to raise the base of the stapler above the strip with several layers of tape. This keeps the staple from being driven deep into the strip, causing a dent that later will have to be sanded down.
Jim
Keep your paddle wet and your seat dry!

User avatar
jimlgordon
Posts: 109
Joined: Mon Nov 20, 2017 6:57 pm
Location: Bainbridge Island, Washington

Re: Bostitch staple puller

Post by jimlgordon » Sat Apr 14, 2018 7:59 pm

Thanks for the tip. It worked very well and saved a lot of time.

Post Reply