caning canoe seat

If you know a good tip or technique to help get through a construction "stumbling block", please post it here. If you have questions concerning building problems, please post them on the "Builders' Forum".
Post Reply
all
Posts: 3
Joined: Mon Mar 25, 2013 7:49 pm

caning canoe seat

Post by all » Mon Jul 27, 2015 8:11 pm

Looking for some tips for routing the groove for the cane's spline.
If I am using 1/4" x 1/4" spline is there any issue with using a 1/4" router bit given that the spline is somewhat tapered? Also, how best to route the curve? Other suggestions are greatly welcomed.

User avatar
Patricks Dad
Posts: 1378
Joined: Wed Oct 13, 2004 1:11 pm
Location: Warrenville, Illinois

Re: caning canoe seat

Post by Patricks Dad » Mon Aug 03, 2015 7:11 pm

The spline suppliers usually specify the size of the groove to cut.

To cut the groove, I always create a template out of some thin material (e.g., 1/8" masonite). Once I'm happy with the shape of the template, I use my router to carefully cut the entire groove.

enjoy your build!
Randy Pfeifer
(847) 341-0618
Randy.Pfeifer1@gmail.com

Post Reply