Redbird Seat Height
Redbird Seat Height
I am to the point of mounting my seats on my Redbird. I am looking for anyone who can tell me what there experience has been on the position of the seats in relationship to the gunnels.
Are you going to be paddling kneeling Canadian-style or sitting? Kneeling paddlers should have the seats installed with enough room underneath so that feet can get under there comfortably. Safety is another issue, if the feet become jammed under a too-low seat when one needs to exit quickly. My feet (size 12) need about 11.5 inches, and that might be a good seat height to start with, if other paddlers are going to be using the canoe.
Sitting paddlers can be seated lower for more stability, and if the seats are too high at eleven inches they can be lowered with longer bolts and drops. Generally, sitting paddlers need more stability than those kneeling and installing the seats lower down will help.
Paddling style is another thing that could affect seat height... paddling with bent shafts might mean that sitting paddlers can be seated lower down with comfort, while those using straight shafts would be more comfortable higher up.
Probably best to try various heights if there's any doubt, to find the most suitable arrangement. Adjusting seat height shouldn't be a problem in canoes, it's done all the time to create a better "fit" for any individual paddler... enjoy the build and the paddling!
Sitting paddlers can be seated lower for more stability, and if the seats are too high at eleven inches they can be lowered with longer bolts and drops. Generally, sitting paddlers need more stability than those kneeling and installing the seats lower down will help.
Paddling style is another thing that could affect seat height... paddling with bent shafts might mean that sitting paddlers can be seated lower down with comfort, while those using straight shafts would be more comfortable higher up.
Probably best to try various heights if there's any doubt, to find the most suitable arrangement. Adjusting seat height shouldn't be a problem in canoes, it's done all the time to create a better "fit" for any individual paddler... enjoy the build and the paddling!
-
- Posts: 45
- Joined: Tue Jul 20, 2004 1:13 pm
- Location: Caledonia ON
- thechrisperkins
- Posts: 23
- Joined: Sun Mar 19, 2006 6:34 pm
- Location: Alaska
- Contact:
I would agree with the 8.5 inch seating height... especially if you are new to canoeing. I built my Redbird at plans height of 9" and it was "sporty" for the first few hours. Nothing that isn't easily accustomed to, but at first is a little aggressive for a novice paddler.
I elected to mount my fittings to the sidewall instead of hanging from the gunwale. I am perfectly satisfied with the results. Some accurate measurements and leveling are required...
Realize that a single paddler in the "aft" postition is going to raise the bow, but the Redbird will easily track a straight line. All that is required is to paddle on the side you are leaning into.
Else; if paddling solo (per plans) paddle from the front seat going towards the stearn for a more "balanced" canoe. I, personally am not a fan of this, as it is not as manuverable.
-Chris
I elected to mount my fittings to the sidewall instead of hanging from the gunwale. I am perfectly satisfied with the results. Some accurate measurements and leveling are required...
Realize that a single paddler in the "aft" postition is going to raise the bow, but the Redbird will easily track a straight line. All that is required is to paddle on the side you are leaning into.
Else; if paddling solo (per plans) paddle from the front seat going towards the stearn for a more "balanced" canoe. I, personally am not a fan of this, as it is not as manuverable.
-Chris
Air and Water, we need both to survive. The medium is irrelevant, movement is life.