On my recently purchased plans for the Freedom 15' two of the aft stations, #10 & #11 are color coded.
#10 is outlined in green & #11 is outlined in red. Is there any reason for this?
Best,
Bill
Freedom 15 plans
- Patricks Dad
- Posts: 1476
- Joined: Wed Oct 13, 2004 1:11 pm
- Location: Warrenville, Illinois
Station Mold Colors
Hi Bill,
You are quite right the aft station molds are colored, if you look close you'll notice that they are, black,red blue & green. I can only imagine that its because they some of them converge to almost the same point at the keel line if you see what i mean, the seperate colors try to make them easey to identify at that point. I hope i have helped because i had the same issue on my set of plans, & this is the only reason i could come up with, unless anyone else has other suggestions?
Best Regards
Steve
You are quite right the aft station molds are colored, if you look close you'll notice that they are, black,red blue & green. I can only imagine that its because they some of them converge to almost the same point at the keel line if you see what i mean, the seperate colors try to make them easey to identify at that point. I hope i have helped because i had the same issue on my set of plans, & this is the only reason i could come up with, unless anyone else has other suggestions?
Best Regards
Steve
I'm not as good as I once was, but I'm as good once as I ever was !!
- Joan and Ted
- Site Admin
- Posts: 63
- Joined: Wed May 05, 2004 10:58 am
- Location: Peterborough, Ontario
- Contact: