Freedom 15 launched
Freedom 15 launched
Last weekend I launched my Freedom 15 (stretched to 16'). It's already back in the shop, since I haven't varnished it yet. I'm going to start spraying it today with System 3 wr-lpu.
- Juneaudave
- Posts: 522
- Joined: Sat May 08, 2004 12:42 pm
- Location: Juneau, Alaska
- Contact:
- Glen Smith
- Posts: 3719
- Joined: Sat May 08, 2004 9:08 am
- Location: Baie-St-Paul, Quebec, Canada
- Patricks Dad
- Posts: 1476
- Joined: Wed Oct 13, 2004 1:11 pm
- Location: Warrenville, Illinois
Sluggo,
Very nice!!!
I am interested to hear:
a. how much she weighs;
b. location of your thwarts (and your intended functions); and
c. paddling impressions.
I almost built a stretched F15, but opted for a different approach. My canoe is nearly finished, but a move across the country and resettling has slowed down the final touches.
Enjoy your finely crafted vessel!
Snowman
Very nice!!!
I am interested to hear:
a. how much she weighs;
b. location of your thwarts (and your intended functions); and
c. paddling impressions.
I almost built a stretched F15, but opted for a different approach. My canoe is nearly finished, but a move across the country and resettling has slowed down the final touches.
Enjoy your finely crafted vessel!
Snowman
Snowman back East
-
- Posts: 45
- Joined: Fri Oct 17, 2008 8:52 pm
- Location: Chapel Hill, NC
Congratulatons!!
A truly beautiful boat. I know the work that went into it-I am just finishing up our Freedom 15 also-built the seat frames today and will hopefully install them tomorrow.
I also would be interested in your weight/seat locations as well. I have another 15' boat that I measured and am anticipating the seat locations now. We have about a 40 pound difference between my wife and I.
I assume that you also made the matching paddle?? Very nice work. I like the accent stripe on the boat. And the stems are unique
What was your impression from paddling it?
I hope you enjoy your beautiful new boat
Vann Evans
A truly beautiful boat. I know the work that went into it-I am just finishing up our Freedom 15 also-built the seat frames today and will hopefully install them tomorrow.
I also would be interested in your weight/seat locations as well. I have another 15' boat that I measured and am anticipating the seat locations now. We have about a 40 pound difference between my wife and I.
I assume that you also made the matching paddle?? Very nice work. I like the accent stripe on the boat. And the stems are unique
What was your impression from paddling it?
I hope you enjoy your beautiful new boat
Vann Evans
Hi guys,
The canoe weighs in at 57lbs after all the hardware and stuff is installed. I placed the foreward seat right as the plans indicate, x a factor of 1.08 to make up the difference from 15' to 16'. For the rear seat the plans give a range. I simply put the seat at the furtherst aft position as given on the plans. This was to make more space in front of the seat and keeping in mind that the canoe is stretched. The center thwart is at the center as per the plans and I didn't try to balance the canoe for portaging. The 2nd thwart is a kneeling thwart for when I'm paddling solo. It is 18" aft of centre. I tried paddling it solo and found it a bit tricky but I was sitting aft of the thwart whereas I now think I'm supposed to sit forward of the thwart (I've never used a kneeling thwart before, nor have I solo paddled a modern assymetrical canoe). I think if I'm foreward of the thwart, the position will be pretty good. The trim wasn't too far off even with me behind the thwart.
With my wife and two kids in the canoe, after a couple of solid strokes the canoe really started to slip through the water nicely. It definitely moves easier through the water than the coleman canoes that we've rented recently (no surprise there), and it was extremely stable for us and the two young kids (4 and 6).
Vann, I would suggest that you place the forward seat as the plans indicate and then keep the back seat closer to the thwart in the range given on the plans. If I recall correctly, the range is 48" to 55", so maybe aim for 48" to 51". I think it would be very hard to really know what's up without trying it first. Maybe stick a couple of milk crates in the canoe and take it for a quick paddle. I just chose positions for different reasons (maximize space between seats) and it's fine by me.
The canoe weighs in at 57lbs after all the hardware and stuff is installed. I placed the foreward seat right as the plans indicate, x a factor of 1.08 to make up the difference from 15' to 16'. For the rear seat the plans give a range. I simply put the seat at the furtherst aft position as given on the plans. This was to make more space in front of the seat and keeping in mind that the canoe is stretched. The center thwart is at the center as per the plans and I didn't try to balance the canoe for portaging. The 2nd thwart is a kneeling thwart for when I'm paddling solo. It is 18" aft of centre. I tried paddling it solo and found it a bit tricky but I was sitting aft of the thwart whereas I now think I'm supposed to sit forward of the thwart (I've never used a kneeling thwart before, nor have I solo paddled a modern assymetrical canoe). I think if I'm foreward of the thwart, the position will be pretty good. The trim wasn't too far off even with me behind the thwart.
With my wife and two kids in the canoe, after a couple of solid strokes the canoe really started to slip through the water nicely. It definitely moves easier through the water than the coleman canoes that we've rented recently (no surprise there), and it was extremely stable for us and the two young kids (4 and 6).
Vann, I would suggest that you place the forward seat as the plans indicate and then keep the back seat closer to the thwart in the range given on the plans. If I recall correctly, the range is 48" to 55", so maybe aim for 48" to 51". I think it would be very hard to really know what's up without trying it first. Maybe stick a couple of milk crates in the canoe and take it for a quick paddle. I just chose positions for different reasons (maximize space between seats) and it's fine by me.