Jim,
Here's another system of using spring clamps to hold strips together to ensure hairline joints.
Harbor Freight sells an immensely strong little spring clamp for under two bucks with serrated rubber ends that really grips the strip below tightly without marring. Couple that with pieces of 1/4" dowel to protect the cove edges and you have a two-part clamping system for less than $2 per unit. You can really push down hard on these clamps to get strips tightly into alignment with the strip below and these little clamps will hold the strip perfectly.
NewSpring Clamps for Bead and Cove Stripping
- cedarphile
- Posts: 18
- Joined: Sun Jan 22, 2017 11:41 am
Re: NewSpring Clamps for Bead and Cove Stripping
I may check into those clamps !
The good thing about my clamps, you only need one hand, the inner tube keeps constant pressure, on the strip, if the clamp should slip slightly, and the plastic tubing is always with the clamp, no bending over to pick it up if I drop it !
There is a Harbor Freight store about 75 miles away. Time for a road trip.
Jim
The good thing about my clamps, you only need one hand, the inner tube keeps constant pressure, on the strip, if the clamp should slip slightly, and the plastic tubing is always with the clamp, no bending over to pick it up if I drop it !
There is a Harbor Freight store about 75 miles away. Time for a road trip.
Jim
Keep your paddle wet and your seat dry!
Re: NewSpring Clamps for Bead and Cove Stripping
I have now had the opportunity to really put these clamps to the Test !
They work great !
here is a few pics, of my latest build, and clamps.
![Image](https://hosting.photobucket.com/images/y390/JimDodd/IMG_3714%281%29.JPG)
![Image](https://hosting.photobucket.com/images/y390/JimDodd/IMG_3743.JPG)
![Image](https://hosting.photobucket.com/images/y390/JimDodd/IMG_3747.JPG)
![Image](https://hosting.photobucket.com/images/y390/JimDodd/IMG_3842.JPG)
They work great !
here is a few pics, of my latest build, and clamps.
Keep your paddle wet and your seat dry!