Matte finish varnishes
- Juneaudave
- Posts: 522
- Joined: Sat May 08, 2004 12:42 pm
- Location: Juneau, Alaska
- Contact:
Matte finish varnishes
Has anyone found an exterior matte finish varnish they like? I bought a can of Interlux Goldspar (satin finish), got it home and noticed it was for interior use. Does that interior rating mean it doesn't have the UV and would be ok over several layers of regular exterior gloss? Or does the interior rating mean it simply won't work on an outside surface. I read a post last year or so that indicated you should first varnish with gloss, which provided the UV, then finish with a couple coats of the matte to get the duller finish.
Newfound Woodworks carries a matte varnish made by HMG.
http://www.newfound.com/varnish.htm
It has "fewer" UV inhibitors than gloss, so I figure I'll just add more coats. I have two coats
(so far) on the interior of my canoe and really like the dull finish. And it does cover up or
minimize little imperfections in the glassing job which is a good thing for me. No idea how
it will hold up over time, though.
http://www.newfound.com/varnish.htm
It has "fewer" UV inhibitors than gloss, so I figure I'll just add more coats. I have two coats
(so far) on the interior of my canoe and really like the dull finish. And it does cover up or
minimize little imperfections in the glassing job which is a good thing for me. No idea how
it will hold up over time, though.
The Interlux paint booklet says that Goldspar Satin is UV resistant, but on p.14 also say that the UV protection in their varnishes includes surface stabilizers to maintain surface gloss and color. If they don't recommend the satin Goldspar, a reason might be that the surface stabilizers aren't there in the satin version and the varnish could get cloudy and change color more quickly, but that's just my half-baked reason why. I couldn't find the reason for not using satin outside actually stated in the booklet, but the advice I got from a paint shop owner on exterior paints generally was to always use a gloss paint for durability since the surface was harder and more resistant to breakdown.
IIRC, Epifanes makes a varnish in satin for exterior use, maybe their formula includes protection that the Interlux doesn't have. If Interlux says that their varnish isn't suitable then there must be a good reason for it.
In the booklet, their helpline is 1-800-468-7589, they might be able to advise on the whys and hows.
IIRC, Epifanes makes a varnish in satin for exterior use, maybe their formula includes protection that the Interlux doesn't have. If Interlux says that their varnish isn't suitable then there must be a good reason for it.
In the booklet, their helpline is 1-800-468-7589, they might be able to advise on the whys and hows.
- Juneaudave
- Posts: 522
- Joined: Sat May 08, 2004 12:42 pm
- Location: Juneau, Alaska
- Contact:
Dave, have you considered rubbing out the glossy finish with steel wool to achieve a matte finish? I often do this on cabinets if the sheen is too high. It is easy to do and should solve the UV protection problem of using a "from the can" matte finish. After your final coat of gloss finish is totally cured (a couple of weeks), rub it with the finest grade of steel wool that will give you the desired matte sheen using mineral spirits as a lubricant. Try it on a test piece to see how it works. It may take some practice to get an even sheen.
Bud
Bud
- Juneaudave
- Posts: 522
- Joined: Sat May 08, 2004 12:42 pm
- Location: Juneau, Alaska
- Contact:
-
- Posts: 42
- Joined: Sun Jul 11, 2004 8:29 am