Any Experience with System 3 SB-112 Epoxy?

Shea · Post by **Shea** » Tue Jun 28, 2005 10:14 pm

I am leaning towards getting the System 3 SB-112 Epoxy for my boat. Has anyone had experience with it?

AlanWS · Post by **AlanWS** » Fri Jul 01, 2005 3:43 pm

I've used it, in combination with system three clear coat. The clear coat is very thin and runny, and cures slowly -- perfect for wetting out the cloth. The SB-112 is much thicker and faster curing -- perfect for the fillin coats. Both are much clearer and more colorless than anything used in the epoxy test.

I would use them again. Here is the canoe I mentioned:
http://home.earthlink.net/~durgerian/si ... acalan.jpg