If I do how wide a strip should I use ?
Should I do it before or after the main glassing is done?
Also bravo to this board. I have been watching it for several months. Went my boat was a dream and am sure glad it is back up. Away we go. Thanks Paul
Should I double glass the stems
- Glen Smith
- Posts: 3719
- Joined: Sat May 08, 2004 9:08 am
- Location: Baie-St-Paul, Quebec, Canada
glassing stems
Hi Paul,
If you are going to glass the outer stems be sure to use bias-cut cloth or it won't wrap around the tight radius. I tried adding the stem glass before the hull glass but then you can't feather in the bump that is produced by the double glass thickness. I normally apply the bias-cut glass after glassing the hull and will continue to do so.
If you are going to glass the outer stems be sure to use bias-cut cloth or it won't wrap around the tight radius. I tried adding the stem glass before the hull glass but then you can't feather in the bump that is produced by the double glass thickness. I normally apply the bias-cut glass after glassing the hull and will continue to do so.