Hi all; I'm in the seat building stage and I was looking around the shed for materials and a few broken hockey sticks appeared. (I keep 'em for inspired occasions such as this)
Hockey sticks are made from 3/4 x 1 1/8 laminated ash. (2 Lousiville, 1 Easton and a Sherwood 5030)
Ted's book suggests 3/4 x1 1/2 hardwood.
I was wondering if this would work as a seat frame? Wondering if it would be too springy? Too thin on the horizontal?
Has anybody ever did this, tried this, thought about this?
Stuart
ps - I have one broken composite stick, but not sure where I'm going to use carbon fibre....
Hockey Stick Seats...
-
- Posts: 18
- Joined: Fri Jan 14, 2005 11:03 pm
- Location: Halifax, NS
- Juneaudave
- Posts: 522
- Joined: Sat May 08, 2004 12:42 pm
- Location: Juneau, Alaska
- Contact:
-
- Posts: 47
- Joined: Fri May 21, 2004 9:09 pm
Hockey stick seats
Hi Stuart,
I have been collecting broken hockey sticks for a long time. I've decorated my son's room with them, built small tables with them, and we are considering putting a floor together out of some of the nicer wooden ones. I even came home one day and found my son had made a glider rocker out of them.
I've wanted to make a hockey themed canoe using them somehow, but haven't had the ideas, or the guts, to do it yet.
I think the seats would be the first place to start with them. Just pick some really nice broken sticks, that'll look good in the boat. You won't want any of the used and abused sticks. You could also continue them onto the decks, and maybe even veneer the gunnels somehow.
If you do it, make sure you post some pictures!
Good luck!
I have been collecting broken hockey sticks for a long time. I've decorated my son's room with them, built small tables with them, and we are considering putting a floor together out of some of the nicer wooden ones. I even came home one day and found my son had made a glider rocker out of them.
I've wanted to make a hockey themed canoe using them somehow, but haven't had the ideas, or the guts, to do it yet.
I think the seats would be the first place to start with them. Just pick some really nice broken sticks, that'll look good in the boat. You won't want any of the used and abused sticks. You could also continue them onto the decks, and maybe even veneer the gunnels somehow.
If you do it, make sure you post some pictures!
Good luck!
-
- Posts: 19
- Joined: Wed Jun 01, 2005 6:57 am
- Location: Jackson, Mississippi
Hockey stick seats
Nova,
Recycling any material into a project is a cool way to tie interests together. Great idea.
You asked about the 3/4" x 1-1/8" laminate being too springy. If you have any concerns about the rigidity of the seat (maybe due to the size of the paddler?) :rolling eyes
you might consider orienting the sticks vertically, with the 3/4" dimension being situated across the top. This will effectively put more material in line with the vertical forces. You may need to get creative in how you want to cane the seats, but by the time you get to them, your problem solving skills should be well honed.
Might be neat to leave the identifying markings and decals so that they can be seen on the frame.
Cheers.
Norman in MS
Recycling any material into a project is a cool way to tie interests together. Great idea.
You asked about the 3/4" x 1-1/8" laminate being too springy. If you have any concerns about the rigidity of the seat (maybe due to the size of the paddler?) :rolling eyes
you might consider orienting the sticks vertically, with the 3/4" dimension being situated across the top. This will effectively put more material in line with the vertical forces. You may need to get creative in how you want to cane the seats, but by the time you get to them, your problem solving skills should be well honed.
Might be neat to leave the identifying markings and decals so that they can be seen on the frame.
Cheers.
Norman in MS
Right now, there is no cure.
-
- Posts: 18
- Joined: Fri Jan 14, 2005 11:03 pm
- Location: Halifax, NS
Thanks Dave...inspiration counts doesn't it.
Rob...a "broken stick collector" eh? Cool ideas - this Sunday, the guys on my team will have a place for their broken sticks. Decks, I like that idea.....decks...
Norman - no sir - I'm at my fighting weight (155 steady - always am) - just didn't want to do that without checking with others. Granted, seats are pretty replaceable. But, I'd sand those logos off.
Dan - I knew this must have been done before - best part is - I can prepare make-readies cheaply. What did you use for the rump area - cane? webbing? Nylon lacing?
Stuart
Rob...a "broken stick collector" eh? Cool ideas - this Sunday, the guys on my team will have a place for their broken sticks. Decks, I like that idea.....decks...
Norman - no sir - I'm at my fighting weight (155 steady - always am) - just didn't want to do that without checking with others. Granted, seats are pretty replaceable. But, I'd sand those logos off.
Dan - I knew this must have been done before - best part is - I can prepare make-readies cheaply. What did you use for the rump area - cane? webbing? Nylon lacing?
Stuart
Seat Webing
Stuart,
I'd give rawhide lacing serious consideration. Check this site out, just about everything you'll need to do it.
There is a past forum discussion: "Rawhide", Posted on May 20, 2005. It's worth reading
http://www.wcha.org/wcj//wc_v19_n6/rawhide.html
For materials, look at this place in Owen Sound.
http://www.cariboucry.com/storefront/fa ... ories.html
Keep your stick on the ice,
phil w
I'd give rawhide lacing serious consideration. Check this site out, just about everything you'll need to do it.
There is a past forum discussion: "Rawhide", Posted on May 20, 2005. It's worth reading
http://www.wcha.org/wcj//wc_v19_n6/rawhide.html
For materials, look at this place in Owen Sound.
http://www.cariboucry.com/storefront/fa ... ories.html
Keep your stick on the ice,
phil w
- Glen Smith
- Posts: 3719
- Joined: Sat May 08, 2004 9:08 am
- Location: Baie-St-Paul, Quebec, Canada
If you are thinking of using rawhide, this message might interest you:
I purchased 3 / 16 ' rawhide from Caribouncry recently. Comments as follows;
Product.......................................very unsatisfactory.
Communication...........................three E-mails by purchaser.
no replys from vendor.
Delivery......................................very late (like three weeks).
Comment....................................the material is being returned .
I purchased the 3 / 16' rawhide from Dave at
www.rawhidelace.com on friday and had the
material on tuesday and the quality is outstanding.
I can tell you more in private at fisherguytoo@volcano.net