Welcome to the new Bear Mountain Builders Forum - an interactive internet service we provide to encourage communication between canoe and kayak builders
I'm trying to hang the seats in my Hiawatha 15'. According to Canoecraft the average measurement for space under the seats should be 9 1/2' to 10 1/2'. However, if I use that figure and place my seats at 9 1/2' from the bottom, they end up only about 1/2 below the inwale. This seems way to high to me.
Am I reading something wrong or is it acceptable to go ahead and lower them a couple of inches?
I didn't like the idea of having the seats up close to the gunwales on my Hiawatha especially due to the low initial stability of this design so I used spacers approximately 2" long. This leaves me with about 8.25" below the seats and I am comfortable with this.