Welcome to the new Bear Mountain Builders Forum - an interactive internet service we provide to encourage communication between canoe and kayak builders
I just glassed the deck of my resolute this morning .I used 4 oz cloth ,and it looks like 2 coats of epoxy will bury it.Is 2 enough or would you guys recomend 3.Any help would be great.I will try to post some pictures.
Though two coats will fill the weave, I use a third coat with 4 oz. glass so that the possibility of sanding into the weave was diminished. If you do sand into the weave, that spot will show through your varnish.
Just a thought.
Sparky
"Those who the gods wish to destroy
they first make angry"
Thanks guys for the input.I just finished the second coat of epoxy and i think it will be enough.The first coat almost burried the cloth so tis coat covered great
.I faired and sanded by hand so I shouldn't have to sand the epoxy much because it's pretty flat.Thanks again!