Humidity and West Systems Epoxy

Bill Parker · Post by **Bill Parker** » Sat Sep 19, 2009 11:40 am

I am building my first Canoe, a Freedom 17, per the directions in Canoecraft. I am a week or two away from applying Epoxy to the outside of the hull. I am concerned about cloudiness in the set due to the humidity here in Arkansas, normally above 80%. Any advice? Thanks in advance!

Glen Smith · Post by **Glen Smith** » Sat Sep 19, 2009 12:03 pm

If you use the West System 207 hardener, you shouldn't have any problems.

Juneaudave · Post by **Juneaudave** » Sat Sep 19, 2009 5:56 pm

I agree wholeheartedly with Glen...I'm somewhat an expert on humidity and wet in SE Alaska.
:rolling eyes