Left overs ?
Left overs ?
I've long sinced closed up shop for the Winter, and now I've been wondering what everyone does with their left over strips, epoxy, and cloth ?
I have a snow scoop that was made from fiberglass with a 3/4" conduit handle. My Step Father used to buy them and sell. They work great ! You never lift the snow. I should take a picture of one ! The're pretty much square with three sides about 6" high.
Anyway, When temps allow I think I'll make a new one to replace the old worn out one.
Ok now some more Ideas from you other builders !
Jim
I have a snow scoop that was made from fiberglass with a 3/4" conduit handle. My Step Father used to buy them and sell. They work great ! You never lift the snow. I should take a picture of one ! The're pretty much square with three sides about 6" high.
Anyway, When temps allow I think I'll make a new one to replace the old worn out one.
Ok now some more Ideas from you other builders !
Jim
Keep your paddle wet and your seat dry!
- Glen Smith
- Posts: 3719
- Joined: Sat May 08, 2004 9:08 am
- Location: Baie-St-Paul, Quebec, Canada
Re: Left overs ?
I built a 6 foot display canoe with some of the leftovers.
You do not have the required permissions to view the files attached to this post.
- Patricks Dad
- Posts: 1476
- Joined: Wed Oct 13, 2004 1:11 pm
- Location: Warrenville, Illinois
Re: Left overs ?
I build paddles with my left overs. Here's a pic of a few. All have hollow shafts made with leftover strip. All weigh in the 1 pound range.
Re: Left overs ?
Glenn.
If you could only find someone small enough to paddle that six footer !
Randy
16oz? Wow careful where you lay them down ! A good wind, or another paddle would make them vanish !
Thanks guys !
Jim
If you could only find someone small enough to paddle that six footer !
Randy
16oz? Wow careful where you lay them down ! A good wind, or another paddle would make them vanish !
Thanks guys !
Jim
Keep your paddle wet and your seat dry!
- Glen Smith
- Posts: 3719
- Joined: Sat May 08, 2004 9:08 am
- Location: Baie-St-Paul, Quebec, Canada
Re: Left overs ?
I also made a 2 foot kayak and a license plate.
You do not have the required permissions to view the files attached to this post.
- Patricks Dad
- Posts: 1476
- Joined: Wed Oct 13, 2004 1:11 pm
- Location: Warrenville, Illinois
Re: Left overs ?
Excellent Glen!
I also made an outlet cover for my strongback outlets:
I also made an outlet cover for my strongback outlets:
-
- Posts: 196
- Joined: Tue Aug 18, 2009 7:00 pm
Re: Left overs ?
Lots of great uses of materials, guys. Randy, nothing shows care of detail more than fancy workshop stuff, the plug plates are great.
-JIM-
Re: Left overs ?
Great Ideas !
Awesome eye candy !
Got to make some outlet, and switchplate covers !
Jim
Awesome eye candy !
Got to make some outlet, and switchplate covers !
Jim
Keep your paddle wet and your seat dry!
-
- Posts: 255
- Joined: Wed Sep 07, 2005 2:41 am
- Location: united kingdom
- Contact:
- Patricks Dad
- Posts: 1476
- Joined: Wed Oct 13, 2004 1:11 pm
- Location: Warrenville, Illinois
Re: Left overs ?
Alick,
that's awesome! I've thought about making one of these. Really nice!
that's awesome! I've thought about making one of these. Really nice!
Re: Left overs ?
Now I've got a new mission !
Build a wannagan ! Like how it fits under the inwhales, nice and snug ! With a lid, you could lay out a map, serve lunch, fillet a fish ! A small dog would have a perch ! And if sealed, flotation !
Thanks a bunch Alick !
Jim
Build a wannagan ! Like how it fits under the inwhales, nice and snug ! With a lid, you could lay out a map, serve lunch, fillet a fish ! A small dog would have a perch ! And if sealed, flotation !
Thanks a bunch Alick !
Jim
Keep your paddle wet and your seat dry!
-
- Posts: 255
- Joined: Wed Sep 07, 2005 2:41 am
- Location: united kingdom
- Contact:
- HighPlainsDrifter
- Posts: 77
- Joined: Tue Mar 22, 2011 9:30 pm
- Location: Brookings, SD USA
Re: Left overs ?
Randy
Nice looking paddles.
I have a question on the two blades in the center of your six-paddle picture. How did you get your cedar to make that bend ?
Nice looking paddles.
I have a question on the two blades in the center of your six-paddle picture. How did you get your cedar to make that bend ?
- Patricks Dad
- Posts: 1476
- Joined: Wed Oct 13, 2004 1:11 pm
- Location: Warrenville, Illinois
Re: Left overs ?
The strips were bent and clamped around a center core one strip at a time. The convex shape in the middle of the paddle on the right was cut from some solid cedar I had laying around. The scraps from that core were joined to form the convex core shape for the paddle on the left. I chose the arc for those cores to match the maximum curvature I could easily accommodate with bending the strips by hand (no steaming was needed).
I've been using the paddle on the right (of those 2 center paddle) as my personal paddle for a couple years now. It's been through 5 wilderness trips so far. It has a monocular embedded in the hand-grip that I really like.
I've been using the paddle on the right (of those 2 center paddle) as my personal paddle for a couple years now. It's been through 5 wilderness trips so far. It has a monocular embedded in the hand-grip that I really like.
- Jeff in Farmington, MI
- Posts: 118
- Joined: Wed Jul 07, 2004 3:19 pm
- Location: Farmington, Michigan, USA
Re: Left overs ?
"A monocular embedded in the hand-grip" ... now that's something I've never seen. That could be very useful in locating a portage trail or campsite from afar. Can you post a close-up photo and a description of how you built that?