Hey everyone its me again.
My epifanes Varnish and thinner just showed up on my door step and i'm eager to start glossing this thing!!
Any advice before I start?
What mix should I use?, Method of applying? Tried and true methods?
Thanks again everyone! You've all been great helps
JP
Varnish
Re: Varnish
Question #3 gives their suggestions:
http://ru.epifanes.com/qanda.htm
I thin up to 50% first coat, 20-25% second and about 10-15 % on the third. Anything after that would be 5-10%.
Brian
http://ru.epifanes.com/qanda.htm
I thin up to 50% first coat, 20-25% second and about 10-15 % on the third. Anything after that would be 5-10%.
Brian
Re: Varnish
Thanks for the link Brian !
Great info !
I've always felt my finishes were sub par. Hopefully I'll improve.
Jim
Great info !
I've always felt my finishes were sub par. Hopefully I'll improve.
Jim
Keep your paddle wet and your seat dry!
Re: Varnish
Brain Thanks A lot for the link that is exactly what I was looking for.
As always this forum to the rescue.
Thanks again.
As always this forum to the rescue.
Thanks again.
I'm up to my torch.