The Bear Mountain Boat Shop

It's the 205 hardener. I have tried the cleaning and also the heat, nothing seems to shift it.
I'm thinking of painting the outside and keeping the wood on the inside. I will get the 207 hardener

I put it on left it for 20 mins before squeeging it off. Can it be recovered?

Poured on and squeegeed off

I'll get a pic tomorrow as it's dark here

It's 9 deg c and the humidity is fine. I used the fast hardener. I also haven't sanded it. Will it sand back?

Hi All
I glassed and resined my freedom 17 yesterday. i have applied 2 coats of west system resin and today the canoe is a bit cloudy. Will this sand off and go clear with the next coat? For info. The weather temp is 9 degrees.
Thanks

Hi Rod,
It does help thanks and no I didn't sand them, however. I can still get to them as I'm only on the top of the stem curve with the planking. Another two days and I would be too late.
Thanks

Hi All, This is my first post on this forum so this topic may have been covered several times. I'm building a freedom 17 with virtually no woodworking experience and I have to say it's (so far) going very well. I'm almost stripped to the top of the inner stem. My question is.. once this removed ther...