I cut the scuppers with a router and jig. I wanted the squarish look of ribs. This is what I came up with to cut them:
![Image](http://www.paddlinglight.com/shared/hansel_bryan_110913-2.jpg)
I still need to clean up the hull edge, etc... Here they are on the canoe:
![Image](http://www.paddlinglight.com/shared/hansel_bryan_110917-505.jpg)
The canoe with the gunwales on. The gunwales pulled out all the warping I was experiencing.
![Image](http://www.paddlinglight.com/shared/hansel_bryan_110917-508.jpg)
I need to install flotation bulkheads in the bow and stern, the seats, thwart, deck, yoke and carry handles. I ordered a bunch of stuff from edscanoes.com, which had excellent prices, service and quality. Then I need to paint the bottom to hide the bugs and varnish.