Fiberglass source
-
- Posts: 2
- Joined: Sat Jan 04, 2020 4:43 pm
Fiberglass source
Ok, I've finally run out of the cheap roll of fiberglass I bought of eBay and need to restock. Where does everyone get their fiberglass from?
Re: Fiberglass source
You may want to let folks know where you are located, there are quite a few suppliers, be easier to find something close to you.
Brian
Brian
Re: Fiberglass source
Do people actually connect with suppliers using this community?
Re: Fiberglass source
Short answer would be yes, some things don't ship as well as others, FG can pickup a lot of creases in transit, so I prefer to pick it up from the supplier.
Also for wood, all wood isn't necessarily easily accessible in all areas of North America ... helps to have folks all over, then you get source locations you may not realize are there.
That's why i suggested including the location.
Also for wood, all wood isn't necessarily easily accessible in all areas of North America ... helps to have folks all over, then you get source locations you may not realize are there.
That's why i suggested including the location.
-
- Posts: 2
- Joined: Sat Jan 04, 2020 4:43 pm
Re: Fiberglass source
Hoping we have some one from your area chime in, I do know that Noahs Marine has a US webstore for FG and other boat building supplies.
Re: Fiberglass source
Check out RAKA. I've used them for years.
Everybody charges a lot for shipping . Epoxy and cloth runs about$50 for 3 gal of resin and 12 yds of cloth. I always order one pump and a dozen or so of those Cigar type rollers. Add some fillers in there also.
Might want to check US composites.
Jim
Everybody charges a lot for shipping . Epoxy and cloth runs about$50 for 3 gal of resin and 12 yds of cloth. I always order one pump and a dozen or so of those Cigar type rollers. Add some fillers in there also.
Might want to check US composites.
Jim
Keep your paddle wet and your seat dry!