Welcome to the new Bear Mountain Builders Forum - an interactive internet service we provide to encourage communication between canoe and kayak builders
Glen Smith
Posts: 3719 Joined: Sat May 08, 2004 9:08 am
Location: Baie-St-Paul, Quebec, Canada
Post
by Glen Smith » Wed Mar 24, 2010 11:26 am
I would add the third layer after the epoxy has lost its stickiness. Less risk of trapped bubbles and less cloth moving around when you squeegee.
chrisg
Posts: 31 Joined: Thu Apr 02, 2009 12:31 pm
Location: New Brunswick, Canada
Post
by chrisg » Thu Mar 25, 2010 7:43 am
Thanks Glen, I will go that route.
Tom in MN
Posts: 162 Joined: Tue Feb 22, 2005 11:42 am
Location: Eagan, MN
Post
by Tom in MN » Thu Mar 25, 2010 1:48 pm
I puchased the 127 with the mixture of slow/fast hardener. I layed up the outside of two canoes and got pretty good results.